Request a Free Roof Inspection →

Installed by Hookset
Mule-Hide logo

Mule-Hide Flat Roofing & Coatings

Our exclusive flat-roof and coating supplier — TPO, EPDM, modified bitumen, and silicone/acrylic coatings from one proven manufacturer.

Why We Install It

The Mule-Hide Difference

Mule-Hide Products Co. is our exclusive manufacturer for flat and low-slope roofing and roof coatings. We've consolidated every membrane system — TPO, EPDM, and modified bitumen — and every restoration coating — 100% silicone and elastomeric acrylic — under Mule-Hide so every flat-roof product we install comes from one accountable, proven source with consistent manufacturer warranties and a single point of support. That means one set of compatible flashings, accessories, and warranty documentation across your entire flat-roof project, whether it's a garage, a commercial building, or a coating restoration.

Key Features

  • TPO — 60 & 80-mil, heat-welded seams, reflective white surface
  • EPDM — 60 & 90-mil rubber, adhered, fastened, or ballasted
  • Modified Bitumen — 2-ply SBS, self-adhered (torch-free)
  • 100% Silicone coating — seamless, holds ponding water
  • Elastomeric Acrylic coating — reflective, budget restoration
  • Manufacturer warranties across membranes & coatings
In the Field

Mule-Hide in the Field

Flat Roofing & Coatings installations and product examples.

Commercial flat roof — membrane surface with HVAC
Commercial flat roof — TPO/EPDM membrane surface with integrated HVAC.
New TPO roofing installation
New TPO membrane installation — heat-welded seams.
Build My Price Lines

Mule-Hide Flat Roofing & Coatings Lines

Every line below is available in Build My Price — explore the options, then estimate your project instantly.

Membrane Systems

Single-Ply Membrane

TPO · 60-mil

$950 /sq

$$$

Reflective · Energy Star

Mule-Hide's TPO is a 60-mil thermoplastic polyolefin membrane mechanically fastened to the deck with plates and fasteners, then heat-welded at every seam. The bright white surface reflects sunlight for real summer energy savings and qualifies for Energy Star and cool-roof rebates. The default choice for garages, additions, and light-commercial flat roofs.

60-milMechanically FastenedHeat-Welded
Most common flat roof choiceReflective white surface lowers cooling costHeat-welded seams — watertightEnergy Star & Title 24 compliant

Color Options (3)

White

Cool Gray

Tan

Colors shown for reference — final selection confirmed at inspection.

Build My Price

Single-Ply Membrane

TPO · 60-mil

$875 /sq

$$

Smooth · No Fasteners

Mule-Hide's 60-mil TPO fully adhered to a cover board with bonding adhesive — no mechanical fasteners, so the membrane lies perfectly flat with no fastener-pattern telegraphing. The smooth, uniform surface is ideal for rooftops that are visible from above or receive foot traffic. Same heat-welded seam performance as the fastened system.

60-milFully AdheredHeat-Welded
No fasteners to telegraphSmooth, uniform membrane surfaceHeat-welded seams — watertightGreat for visible rooftop areas

Color Options (2)

White

Cool Gray

Colors shown for reference — final selection confirmed at inspection.

Build My Price

Single-Ply Membrane

TPO · 80-mil

$950 /sq

$$$

Premium · Heaviest TPO

Mule-Hide's 80-mil TPO is fully adhered to a cover board with bonding adhesive — no mechanical fasteners, so the membrane lies perfectly flat with no fastener-pattern telegraphing. The 80-mil thickness adds puncture and weathering resistance for roofs that see foot traffic, hail, or long service lives. The premium single-ply option.

80-milFully AdheredHeat-Welded
Heaviest-gauge TPO availableFully adhered — no fasteners to telegraphSuperior puncture & weatheringLongest single-ply service life

Color Options (2)

White

Gray

Colors shown for reference — final selection confirmed at inspection.

Build My Price

Single-Ply Membrane

TPO · 60-mil

$820 /sq

$$

Rock-Protected · Reflective

Mule-Hide 60-mil TPO loose-laid and held in place by a layer of river-rock ballast. The rock shields the membrane from UV, hail, and foot traffic, and heat-welded seams keep it watertight. Note: the rock covers TPO's reflective white surface, so you lose the cool-roof energy benefit — choose this for durability and lowest membrane cost, not energy savings. Commercial only, on structures engineered to carry the ballast weight, on truly flat (not low-slope) roofs.

60-milBallasted (River Rock)Heat-Welded
River-rock ballast shields membraneHeat-welded seams — watertightReflective TPO under rock (cool-roof lost under ballast)Commercial flat roofs only (structural load)

Color Options (2)

White (under ballast)

Cool Gray (under ballast)

Colors shown for reference — final selection confirmed at inspection.

Build My Price

Single-Ply Membrane

TPO · 80-mil

$900 /sq

$$$

Heaviest TPO · Rock-Protected

Mule-Hide 80-mil TPO loose-laid under river-rock ballast — the heaviest TPO membrane, shielded from UV, hail, and foot traffic by the rock for the longest ballasted-TPO service life. Heat-welded seams. The rock covers the reflective surface, so this is a durability and lowest-cost choice, not an energy-savings one. Commercial only, on structures engineered for the ballast weight, on truly flat roofs.

80-milBallasted (River Rock)Heat-Welded
Heaviest-gauge TPO availableRiver-rock ballast protects membraneHeat-welded seams — watertightLongest ballasted TPO service life

Color Options (2)

White (under ballast)

Gray (under ballast)

Colors shown for reference — final selection confirmed at inspection.

Build My Price

Single-Ply Membrane

EPDM · 60-mil

$850 /sq

$$

Proven Rubber · Cold-Flexible

Mule-Hide 60-mil EPDM is a synthetic rubber membrane fully adhered to the substrate, with seams bonded using splice tape or adhesive. EPDM has decades of proven performance and stays flexible through Wisconsin freeze-thaw cycles where cheaper membranes crack. The black surface absorbs winter heat — helpful on low-slope roofs prone to ice.

60-milFully AdheredSplice Tape / Adhesive
Decades-proven rubber membraneStays flexible in Wisconsin coldExcellent hail & puncture resistanceBlack absorbs heat in winter

Color Options (1)

Black

Colors shown for reference — final selection confirmed at inspection.

Build My Price

Single-Ply Membrane

EPDM · 60-mil

$900 /sq

$$$

Value Rubber · Labor-Intensive

Mule-Hide 60-mil EPDM mechanically fastened to the deck with plates and fasteners, then seamed with splice tape. Layout, fastener placement, and plating take more time than a fully adhered install, so the price runs higher — but there's no adhesive cure time, and the same proven cold-weather flexibility and durability as adhered EPDM.

60-milMechanically FastenedSplice Tape
No adhesive cure timeProven cold-weather flexibilitySame durable black rubberMore fasteners & plates = more labor

Color Options (1)

Black

Colors shown for reference — final selection confirmed at inspection.

Build My Price

Single-Ply Membrane

EPDM · 90-mil

$780 /sq

$$

Heaviest EPDM · Lowest Membrane Cost

Mule-Hide 90-mil EPDM laid loose and held in place by a layer of river-rock ballast — the rock shields the membrane from UV, hail, and foot traffic, giving the longest EPDM service life at the lowest membrane cost. Only suitable for structures engineered to carry the ballast weight, and for truly flat (not low-slope) roofs.

90-milBallasted (River Rock)Splice Tape
Heaviest EPDM availableRiver rock ballast protects membraneLowest membrane cost per squareStructural load must support rock

Color Options (1)

Black (under ballast)

Colors shown for reference — final selection confirmed at inspection.

Build My Price

Single-Ply Membrane

EPDM · 60-mil

$720 /sq

$

Rock-Protected · Value

Mule-Hide 60-mil EPDM loose-laid and held in place by a layer of river-rock ballast. The rock shields the membrane from UV, hail, and foot traffic, giving long service life at the lowest membrane cost. Only suitable for structures engineered to carry the ballast weight, and for truly flat (not low-slope) roofs — commercial only.

60-milBallasted (River Rock)Splice Tape
River-rock ballast shields membraneLowest membrane cost per squareNo fasteners or adhesive — loose-laidCommercial flat roofs only (structural load)

Color Options (1)

Black (under ballast)

Colors shown for reference — final selection confirmed at inspection.

Build My Price

Single-Ply Membrane

EPDM · 60-mil

$980 /sq

$$$$

Walkable · High-Traffic

Mule-Hide 60-mil EPDM loose-laid under a layer of concrete pavers on a protection sheet — a fully walkable rooftop surface that supports foot traffic, rooftop patios, and equipment access. The paver ballast gives maximum membrane protection and the longest service life, but adds the heaviest structural load and the highest cost. Commercial only, on structures engineered for the paver weight.

60-milPaver-BallastedSplice Tape
Walkable rooftop surfaceConcrete paver ballastHigh foot traffic / rooftop patiosHeaviest structural load

Color Options (1)

Black (under pavers)

Colors shown for reference — final selection confirmed at inspection.

Build My Price

Modified Bitumen

Modified Bitumen · 2-Ply SBS

$875 /sq

$$$

Torch-Free · Puncture-Resistant

Mule-Hide's SBS modified-bitumen system is installed entirely with self-adhering sheets — no torch, no kettles, no fumes. A base sheet plus a granulated cap sheet create a tough, redundant membrane that resists punctures and tears far better than single-ply. The granulated cap sheet comes in colors to complement the building.

2-ply SBSSelf-AdheredSelf-Adhered Lap
No open flame / torch on roofSelf-adhering — clean, fast installExcellent puncture & tear resistanceGranulated surface in choice of colors

Color Options (4)

White Granite

Gray Granite

Charcoal

Desert Tan

Colors shown for reference — final selection confirmed at inspection.

Build My Price

Restoration Coatings

Roof Coating

100% Silicone Coating

$350 /sq

$

Restoration · No Tear-Off

Mule-Hide's 100% silicone coating is roller- or spray-applied over a sound existing flat or low-slope roof — no tear-off required. The high-solids silicone forms a seamless, waterproof, UV-reflective layer that bridges minor cracks and stops active leaks, including ponding water that other coatings won't hold. Extends an aging roof's life 10–15 years at a fraction of replacement cost. Requires a structurally sound, cleaned substrate.

20–30 mil dry filmCoating (Roller / Spray)Seamless
No tear-off — restores existing roofSeamless, waterproof, UV-reflectiveStops active leaks & seals ponding waterExtends roof life 10–15 years

Color Options (3)

White

Light Gray

Medium Gray

Colors shown for reference — final selection confirmed at inspection.

Build My Price

Roof Coating

Elastomeric Acrylic Coating

$275 /sq

$

Budget Restoration

Mule-Hide's elastomeric acrylic coating is applied over a clean, sound existing roof for UV protection and reflectivity. Lighter-duty than silicone — acrylics don't hold up under standing ponding water, so they're best on roofs with positive drainage. A budget-friendly way to extend a sound roof's life and lower summer cooling costs.

15–20 mil dry filmCoating (Roller / Spray)Seamless
Lowest-cost restorationReflective white cuts cooling costElastic — expands & contractsBest on sound roofs, mild conditions

Color Options (2)

White

Light Gray

Colors shown for reference — final selection confirmed at inspection.

Build My Price

Ready to Build Something Extraordinary?

Whether you need a new roof, professional maintenance, a remodel, or custom workflows — the Hookset ecosystem has you covered. Let's talk.

Call Text